nerkco

Loading...

nerkco

Register

Uncategorized - June 10, 2021

Best Mini ITX Cases 2021: MITX PC Cases for Tiny Gaming Computers


Big, flashy gaming PCs could get extra consideration for his or her seems and all the facility that may be packed inside, however there’s rather a lot to like a few compact, Mini ITX construct. With a fantastic Mini ITX case, you possibly can pack in all you want in your laptop right into a construct that is no greater than a online game console. It’s not simply the dimensions, although, but in addition the truth that now you can put surprisingly highly effective parts into these builds. Processers and graphics cards simply maintain getting higher, and now you will discover loads of highly effective parts that run cool sufficient to stay contained in the tighter quarters of a Mini ITX case.

These compact computer systems make for nice media middle units, as you possibly can take pleasure in all the pliability for a full desktop working system and the facility of a gaming PC without having to have a giant, chunky PC subsequent to your gaming TV. Of course, there’s additionally no hurt constructing one simply to have as your important laptop if you need a trendy, minimalistic gaming desk setup. These builds generally is a little trickier, as you actually have to decide on a variety of parts primarily based on whether or not they’ll match into the system you need to construct. So, for those who’re prepared to start out kitting out your tiny, surprise PC, you will need to select a case first. Luckily, we now have some actually nice choices picked out for you.

TL;DR – These are the Best Mini ITX Cases:

1. Cooler Master NR200

Best Mini-ITX Case

Cooler Master NR200

The dream of the ultra-compact gaming PC is perhaps as alive as its ever been, but you don’t want to have to sacrifice the option of high-end components just to make it happen. With the Cooler Master NR200, you’re getting a case that’s just 18.25 liters in volume, but it finagles its internal space to hold some serious hardware.

You can go beastly with your CPU, as there’s room for a decently sized air cooler or even a 240mm radiator to get that liquid-cooling action. You’ve also got enough room in the case for a 330mm-long graphics card, which is longer than the Nvidia GeForce RTX 3090 FE. You’ll also get dedicated holders for two 2.5-inch drives and one 3.5-inch drive, which can all back up the NVMe SSD you should definitely be planning to include in an SFX build like this. It’s all the more surprising the amount of room this case has for fans.

2. Thermaltake Core V1

Best Budget Mini ITX Case

Thermaltake Core V1

For a smaller cube-style case that may nonetheless pack a variety of {hardware}, the Thermaltake Core V1 has rather a lot to supply. At a dirt-cheap worth of simply $45, the Core V1 gives a smaller footprint than Mini ITX “towers,” whereas nonetheless providing sufficient room for a full-size graphics card, an ATX energy provide, and even water cooling.

A closed-loop liquid-cooler would match simply, however a small customized loop would require you to get inventive. At round 22-liters, it’s nonetheless on the bigger facet of “medium” ITX circumstances, however it’s nonetheless rather more compact than an ordinary mid-tower case (and has metal development, in addition).

If you need one thing a bit smaller on an analogous finances, the 19.8-liter Cooler Master Elite 130 and 15.4-liter Elite 110 are each nice options. Their smaller measurement means you’re a bit extra restricted by way of airflow and cable administration, however the trade-off could also be value it for those who’re in search of a extra modest footprint.

3. Fractal Design Node 202

Best Console-Style Mini ITX Case

Fractal Design Node 202

When you’re on a mission to build a gaming pc that’s more powerful but smaller than a console, there’s no substitute for the Fractal Design Node 202. It’s a 10-liter chassis that can fit full-sized graphics cards inside and keep you on budget with its $145 price tag with an included 450W power supply, though a $70 price model without a power supply is also available. Better yet, it has a very clean, modern aesthetic that wouldn’t look out of place in your home entertainment center.

There are only two mounting points for two 120mm case fans, but they’ll have to be low-profile and the same goes for your CPU cooler—you can forget about liquid-cooling your CPU. However, even without any additional fans, the Node 202 offers plenty of ventilation for the CPU and GPU areas, which are also all protected by dust filters.

4. Thermaltake Tower 100

Best Compact Mini ITX Case

Thermaltake Tower 100

Getting jealous of the the Xbox Series X with its towering vertical orientation however do not need to abandon the league of PC players? The Thermaltake Tower 100 has you coated with a compact measurement and a design that’ll allow you to showcase your rig. This mini ITX case opts for airflow that ventilates out the highest and both pulls in by the rear or from under, leaving the entrance and sides for glass panels to let your inside parts shine.

Though it is a small case for ITX builds, it truly is constructed with house for traditional ATX energy provides, so you do not have to seek out an costly SFX energy provide. You’ll additionally get a good quantity of house for a CPU air cooler and a full-length graphics card. There’s one quirk of this funky design: the motherboard I/O all comes out of the highest, however it’s cleverly tucked behind the highest filter and there are some routing channels to have cables come out the again. Thermaltake’s personal front-panel IO provides much more simply accessible ports with two USB 3.0 slots and a USB 3.2 Gen 2 Type-C port alongside mic and headphone jacks.

5. Lian Li PC-O11D Mini

Best Big Mini ITX Case

Lian Li PC-O11D Mini

Some Mini ITX cases are all about seeing how little you can go, but it doesn’t have to be that way. You can get a compact case that’s not so tight that getting parts in is a struggle. You shouldn’t have to make a ton of sacrifices just to go small. With the Lian Li PC-011D Mini, you don’t have to. This case squeezes the power supply in its own small section, requiring a SFX or SFX-L unit. But, on the flip side, it leaves a ton of room for components.

While this case will work for your ITX build, it actually has the space for mATX and even ATX motherboards. That means you can configure for ITX now, and switch your build up a few years down the line without needing to get a new case. There’s room for four drives, including two 3.5-inch drives with easy-to-install caddies. You can also fit large CPU coolers and graphics cards, so you won’t have to skimp on performance hardware. There’s even a ton of room for fans and up to 360mm radiators – that’s right, radiators plural. There’s a lot of flexibility to how you build inside the Lian Li PC-011D Mini, and that explains why the D stands for Dynamic.

6. Lian Li TU150

Best Portable Mini ITX Case

Lian Li TU150

Going with a smaller Mini ITX PC case that can assist you save room is sweet however what if it additionally helped make your PC extra transportable. That’s precisely what the Lian Li TU150 units out to do as a comparatively compact chassis with a retractable carrying deal with. This case is a bit bigger on the Mini ITX spectrum, however it has sufficient inside house to allow you to set up an SFX energy provide and a triple-slot graphics card.

Despite its small measurement, there’s loads of locations to maneuver air on this chassis as there are mounting factors for 2 120mm followers on the underside, then one other spot on the back and front of the case. The Lian Li TU150 additionally options intelligent cable routing areas behind the motherboard tray and within the roof of the case.

7. NCase M1 V6.1

Best High-End Mini ITX Case

NCase M1 V6.1

There isn’t a more diehard group of PC enthusiasts than those in the SFF community and if you want a Mini ITX case made for the people by the people, you need the NCase M1 V6.1. Unlike most PC cases made by manufacturers, the NCase M1 V6.1 was crowdsourced using ideas of ardent small ultimate Mini ITX PC fans to create the ultimate case of their dreams. The result is a small chassis that surprisingly large enough to hold almost any sized graphics card, 240mm liquid-coolers, and more.

The NCase M1 v6.1 is insanely impressive when you consider its size. The M1’s versatility also comes with top-notch build quality too, with aluminum construction, tool-less panels, and sleek aesthetics. It’s also highly tuned for maximum cooling with its over 6,000 ventilation holes while a couple of well-placed dust filters will keep your PC components clean. That all said, the NCase M1 is pretty darn expensive at $210 and it’s only available in limited edition runs, but if you want the smallest case possible without making big compromises, this is as good as it gets.

8. Razer Tomahawk

Best RGB Mini-ITX PC Case

Razer Tomahawk

When it involves RGB lighting, few corporations do it higher on their PC equipment than Razer. So, it is time to get excited, as a result of Razer now has the Tomahawk ITX case to allow you to go mini in measurement however main in colour. You’ll get help for Razer’s Chroma RGB lighting results on the underside of the case, giving it a trendy underglow that’ll match proper in with all kinds of Razer’s mice, keyboards, headsets and even Razer’s monitor.

The case could also be small, however it nonetheless has room for a decently tall CPU cooler or perhaps a 240mm radiator for liquid cooling. You’ll need to be careful in your graphics card size although, as you possibly can solely go as much as 320mm, however you’ll have room for a thicker card that wants three growth slots. Impressively, there’s nonetheless room on this case for 3 2.5-inch drives, and Razer manages some sturdy port selection on the entrance panel.

9. Phanteks Eclipse P200A

Best Mini-ITX Tower Case

Phanteks Eclipse P200A

Not every ITX case has to feel like it was designed to be ultra-tiny and come with all the associated headaches to build in. The Phanteks Eclipse P200A is ready to hold your next ITX build but give it more of a standard tower design. And, in fact, will let you go with a lot more standard components not specifically designed for small form factors.

The Phanteks Eclipse P200A will let you build your system with an ATX power supply, has 165mm of clearance for a CPU cooler, and can fit a graphics card 355mm long with a 3-lot width. If you’re inclined toward water cooling, it can even fit multiple 240mm radiators with the front slot actually able to bump up to 280mm. The case may be fairly compact, but it’s not planning to choke your system. Phanteks has built a 1mm perforated mesh at the front with an integrated dust filter for airflow and cleanliness, and there’s a considerable number of fan mounting points. The case also comes with two 120mm D-RGB PWM fans that you can control the lighting of directly from the front panel I/O.

What to Know Before Building a Mini ITX Case

The main selling factor of Mini ITX cases is they’re much smaller and don’t waste any space, but that’s also what makes them so challenging to build in. There isn’t a single square inch of wasted space inside a Mini ITX case, which also means each square-inch will be essential to you for squeezing in a larger GPU, a second solid-state drive, or even what would seem like a simple power cable in a larger chassis.

With that in mind, you’ll want to pre-plan your PC build before you even start buying parts. Measure the GPU and main compartment twice to ensure you can actually fit your desired CPU cooler or graphics card inside the case. Considering how small these PC cases can be, you might even want to buy some custom cables with shorter lengths, so that they don’t take up any more space than needed.

Lastly, you should rehearse your PC build beforehand. It can be all to easy to start installing your motherboard, CPU cooler, and other components only to realize that you’ve blocked off access to your storage mounting points several steps ago.

Building a Mini ITX system is tricky work, but they’re some of the most rewarding puzzles you can solve as a PC builder.

Kevin Lee is IGN’s Hardware and Roundups Editor. Follow him on Twitter @baggingspam





Source link

Archives

Categories

Meta